Brady BP-PR PLUS Series Istruzioni per gli Interventi Scaricare il pdf (Pagina 13)

BP-PR PLUS series

Loading media

Edition 7/06 Quick Operator’s Guide 13

6.1.5 Winding up the label strip in Rewind mode

Fig. 7: Guiding the label strip in Rewind mode

In Rewind mode, the labels are wound up internally after printing for later use.

1. Remove the locking system for Rewind mode if necessary (see ”6.5” on page 18) and install rewind

guide plate (see ”6.4” on page 17).

2. Guide label strip around the rewind guide plate (4) to the internal rewinder (2).

3. Hold rewinder (2) firmly and turn knob (3) clockwise until it stops.

4. Push label strip under a bracket (1) of the rewinder and turn knob (3) counterclockwise until it stops.

The rewinder is fully spread, thus gripping the label strip firmly.

5. Turn rewinder (2) counterclockwise to tighten the label strip.

6. Turn lever (5) clockwise to lock the printhead.

The label roll is loaded for use in Rewind mode.

2 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Nessun commento

Brady BP-PR PLUS Series Istruzioni per gli Interventi Pagina 13